½" Thermostatic Mixing/Diverting Valve (1/2 M/D-316S/S)

The Therm-Omega-Tech Model M/D temperature control valve is designed for 3-way mixing or diverting applications. For fast response, the valve is compact and low mass. Therm-Omega-Tech's valves are designed around our exclusive Thermoloid sensor/controller that automatically and accurately proportions the flow in response to fluid temperature. The Thermoloid sensor/controller is the most advanced and reliable thermal actuator of its type available today.

  • Open temperature: 13 Degree Celsius temperature set point
  • Temperature control valve - all 316 stainless steel

½" High Sample Temperature Valve (1/2 HST)

The HST valve is typically used as a high sample temperature safety shut-off valve for process sampling. The HST valve is typically installed between the sample cooler and the sample analyser to protect the analyser instruments from over-temperature conditions. The HST valve has a maximum operating pressure of 3000PSIG with a maximum operating temperature of 250°F. The unique ram-style plug and seat provide reliable, tight shut-off. All HST valves are covered by a 36 month prorated warranty.

  • Stainless body, fittings, spring and plug
  • Corrosion resistant - long service life
  • Most narrow temperature band available
  • Compact, low mass - fast response
  • Ram-type plug for tight reliable shut-off
  • Sensitive to temperature only
  • Unaffected by pressure variations
  • Operates in any orientation
  • Easy installation with pipe wrench

Click here to download manuals 

½" HAT/RA-HP (EPDM Seals)

The HAT/RA-HP (Heat Actuated Trap/Reverse Acting - High Pressure) valve is commonly used as a thermal pump relief valve on high pressure water pumps. It can also be used to regulate the flow of glycol, water or other media in critical applications or to economically remove heat from equipment or a process.

  • All stainless steel construction
  • Compact, low mass - fast response
  • Corrosion resistant - long service life
  • Most clog-resistant design available
  • Operates in narrow temperature band
  • Unaffected by pressure variations
  • Easy installation with pipe wrench
  • Operates in any orientation
  • Discharges the minimum amount of water required to keep water temperature within safe limits

Click here to download manuals

¼" Heat Actuated Trap (ECONO/HAT-RA)

¼" Heat Actuated Trap (ECONO/HAT-RA)

These valves save space, eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug and seat provide reliable, tight shut-off longer than any other design available. ECONO/HAT-RA valves are covered with a standard 18 month warranty and service policy to further reduce maintenance cost. Since ECONO/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For temperature sensitive applications, such as instrument or certain processes, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.

  • Incredibly compact, low mass - fast response
  • Corrosion resistant - long service life
  • All brass body, stainless steel spring and plug
  • Ram-type plug for tight reliable shut-off
  • Eliminates live steam losses
  • Narrow temperature band
  • Downstream actuator for greater sensitivity
  • Operating temperatures unaffected by pressure
  • Wide choice of set points

Click here to download manuals 

Tube Valve Heat Actuated Trap with Leak Port (TV/HAT/RA-LP)

The TV/HAT/RA-LP continually senses fluid temperature and automatically modulates to maintain desired temperature. Optimum operating temperature improves system efficiency, reduces wear and conserves energy. Therm-Omega-Tech valves are designed around the exclusive Thermoloid® sensor/controller which is the most advanced and reliable thermal actuator of its type available today. All Therm-Omega-Tech valves are factory tested and calibrated to assure unsurpassed accuracy, reliability and quality.

  • 100% factory tested
  • Stainless steel body, fittings, spring and plug
  • Compact, low mass for fast response
  • Corrosion resistant for long service life
  • Most clog resistant design available
  • Narrow temperature band
  • Modulation throughout temperature range
  • Sensitive to fluid temperature only
  • Unaffected by pressure variations
  • Easy to install
  • Operates in any orientation

Click here to download manuals 

Tube Valve Heat Actuated Trap (TV/HAT/RA)

The TV/HAT/RA continually senses fluid temperature and automatically modulates to maintain desired temperature. Optimum operating temperature improves system efficiency, reduces wear and conserves energy. Therm-Omega-Tech valves are designed around the exclusive Thermoloid® sensor/controller which is the most advanced and reliable thermal actuator of its type available today. All Therm-Omega-Tech valves are factory tested and calibrated to assure unsurpassed accuracy, reliability and quality.

  • 100% factory tested
  • Stainless steel body, fittings, spring and plug
  • Compact, low mass for fast response
  • Corrosion resistant for long service life
  • Most clog resistant design available
  • Narrow temperature band
  • Modulation throughout temperature range
  • Sensitive to fluid temperature only
  • Unaffected by pressure variations
  • Easy to install
  • Operates in any orientation

Click here to download manuals 

Tube Valve Heat Actuated Trap (TV/HAT)

These valves save space and eliminate the use of extra, expensive and time consuming piping. They install in seconds. The unique ram-type plug and seat provide reliable, tight shut-off longer than any other design available. TV/HAT valves are covered with our standard 36 month warranty and service policy to further reduce maintenance cost. Since TV/HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems.

  • Compact, low mass for fast response
  • Corrosion resistant for long service life
  • Stainless steel body, fittings, spring and plug
  • Ram-type plug for tight, reliable shut-off
  • Eliminates live steam losses
  • Operates in narrow temperature band
  • Downstream actuator for greater sensitivity
  • Operating temperatures unaffected by pressure
  • Wide choice of set-points

Click here to download manuals

Heat Actuated Trap (HAT/RA)

The model HAT/RA reverse acting valve can be used to regulate the flow of glycol, water or other media in critical applications or to economically remove heat from equipment or a process.

Read more ...

Heat Actuated Trap (HAT)

Since HAT valves discharge condensate well below steam temperature, live steam losses are eliminated. For heating of temperature sensitive instruments or process fluids, the reduced temperature available for tracing simplifies operations and eliminates overheating problems. The unique ram-style plug and seat provide reliable, tight shut-off longer than any other design available.

Read more ...

Copyright 2019