One Revolution Internal Tube Cutter – OTC Series
Features
These tool is designed for hand operation using ratchet or hand wrench for cutting ferrous and non-ferrous tubes.
The cutter bit operates on an eccentric principle with the cutter bit in the closed position insert the cutter into the tube to be cut.
Apply wrench and turn in a clockwise direction. The tool bit will move out and pierce the tube wall. Continued turning and cut the tube off in one revolution. The cutter is then turned counterclockwise slightly to close the bit allowing the cutter to be removed from the tube.
Standard cutter available with 6-inch reach extra-long cutter available on request
Specifications
| Tube O.D. | Tube Gauge | Tube I.D. | Cutter Model No. | Spare Bit Model No. | ||
| mm | inch | BWG | mm | inch | ||
| 15.87 | 5/8″ | 14 15-16 17-18 19-20 22 |
11.4-11.9 12.0-12.9 12.7-13.5 13.5-14.2 14.0-14.7 |
.450-.470 .472-.510 .500-.531 .531-.560 .550-.580 |
OTC-625-14 OTC-625-16 OTC-625-18 OTC-625-20 OTC-625-22 |
OTC-625-SB |
| 19.05 | 3/4 | 14-15 16 17-18 19-20 |
14.7-15.5 15.2-16.0 15.9-16.5 16.7-17.5 |
.580-.610 .600-.630 .625-.650 .660-.690 |
OTC-750-14 OTC-750-16 OTC-750-18 OTC-750-20 |
OTC-750-SB |
| 22.22 | 7/8 | 14-15 16-17 18 19-20 |
17.8-18.5 18.8-19.5 19.3-20.0 19.8-20.6 |
.700-.730 .740-.770 .760-.790 .780-.810 |
OTC-875-14 OTC-875-16 OTC-875-18 OTC-875-20 |
OTC-875-SB |
| 25.40 | 1″ | 14 15 16-17 18-20 22 |
20.8-21.6 21.3-22.1 22.8-22.6 22.6-23.1 23.9-24.6 |
.820-.850 .840-.870 .860-.890 .890-.910 .940-.970 |
OTC-1000-14 OTC-1000-15 OTC-1000-16 OTC-1000-18 OTC-1000-22 |
OTC-1000-SB |