Tube Removal Tools
Tube Wall Reducer
Features
HSS reamer with morse taper to fit in standard drill machine.
Front end is suitably grounded as per tube gauge to facilitate reduction of tube thickness there by weakening expansive joint of tube for its removal.
Specifications
| Tube O.D. inch | Model Number | MT Shank # |
| 3/8 | WR-375 | 1 |
| ½ | WR-500 | 2 |
| 5/8 | WR-625 | 2 |
| 3/4 | WR-750 | 2 |
| 7/8 | WR-875 | 2 |
| 1 | WR-1000 | 3 |
| 1.1/4 | WR-1250 | 3 |
| 1.1/2 | WR-1500 | 3 |
| 1.3/4 | WR-1750 | 3 |
| 2 | WR-2000 | 3 |
| 2.1/2 | WR-2500 | 4 |
| 2.3/4 | WR-2750 | 4 |
| 3 | WR-3000 | 4 |
| 3.1/4 | WR-3250 | 4 |
| 3.1/2 | WR-3500 | 4 |
| 4 | WR-4000 | 4 |
Tube Drift/Knockout Tool
Features
Build from high impact steel for knocking out tube from tube sheet with pneumatic hammer.
Front end machined as per tube gauge for correct alignement thereby facilitating removal of tube without damaginf tube sheet.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | KT-375 |
| ½ | KT-500 |
| 5/8 | KT-625 |
| 3/4 | KT-750 |
| 7/8 | KT-875 |
| 1 | KT-1000 |
| 1.1/4 | KT-1250 |
| 1.1/2 | KT-1500 |
| 1.3/4 | KT-1750 |
| 2 | KT-2000 |
| 2.1/2 | KT-2500 |
| 2.3/4 | KT-2750 |
| 3 | KT-3000 |
| 3.1/4 | KT-3250 |
| 3.1/2 | KT-3500 |
| 4 | KT-4000 |
Collapsing Tool
Features
Used for collapsing the non-ferrous tubes or ferrous tube made thinner using tube wall reduce for driving the tube out of tube sheet.
Preferably to be used with pneumatic hammer.
Specifications
| Tube O.D. inch | Model Number |
| 3/8 | CT-375 |
| ½ | CT-500 |
| 5/8 | CT-625 |
| 3/4 | CT-750 |
| 7/8 | CT-875 |
| 1 | CT-1000 |
| 1.1/4 | CT-1250 |
| 1.1/2 | CT-1500 |
| 1.3/4 | CT-1750 |
| 2 | CT-2000 |
| 2.1/2 | CT-2500 |