Tube Pullers
Pneumatic Vise for Spear Removal – 5/8” to 1-1/2” Outer Diameter
The Pneumatic Vise is available in sizes ranging from 5/8 to 1-1/2-inch (15.9 – 38.1mm) Outer Diameter and offers the most rugged, precision built, completely trouble-free air tool designed to remove spears from tubes. The vise comes complete with two five-foot air hoses, foot control valve with guard, and fittings ready for use. The Pneumatic Vise is 12-inches in length and 6-inches in width and height. Its jaw width is 3-inches and its jaw depth is 2-inches. The vise weighs 24 pounds (10 kilograms) with a maximum operating pressure of 150 pounds (68 kilograms) per square inch. Its gripping force is 15 times airline pressure and its maximum jaw opening (without jaw plates) is 3-inches.
Hydraulic Collet Tube Extractor – 5/8” to 1-1/4” Outer Diameter
The Hydraulic Collet Tube Extractor is designed for 5/8 to 1-1/4-inch (15.9 – 31.8mm) Outer Diameter and allows for quick and efficient removal of tubes from heat. The system is faster than manual tube pulling, saving on time and resources. Minimal training or experience is required to operate the system which features a fast and efficient trigger operation and a gripper that retracts with a spring return, further improving productivity. Featuring a heavy-duty, single-action hydraulic cylinder, this tube extractor offers quick-disconnect couplings and a thermal-protected motor. The system’s 10-foot hose with spring guards and its quick coupler fittings provide for added manoeuvrability. An external pressure relief valve and Gauge monitor the system’s pressure. The Hydraulic Collet Tube Extractor is available on a rental basis. This product is only designed for light Gauge tubes with a maximum 1/2-inch diameter tubesheet made of non-ferrous matter.
WPP-1500 Tube Puller Spear Type – 1/2” to 1-1/2” Outer Diameter
The WPP-1500 Tube Puller is designed for 1/2 to 1-1/2-inch (12.7 – 38.1mm) Outer Diameter and features a heavy-duty, double-acting hydraulic cylinder with hydraulic return and a 30-ton capacity. A safety relief valve on the cylinder protects against over pressurising. Its quick-acting, cylinder-mounted safety lock provides positive engagement with a notched spear extension. All those connections to the cylinder and pump have quick-disconnect couplings. Maximum operating pressure is 10,000 psi.
Manual Tube Puller – 1/4” to 1-1/4” Outer Diameter
Manual Tube Pullers are easy to use and available in sizes ranging from 1/4 to 1-1/4-inch (6.4 – 31.8mm) Outer Diameter. Manual tube pullers only require hand wrenches for insertion and withdrawal and their overall length is kept short to better operate in tight places.